Makita DLX2370T 18V 5.0Ah Li-ion Cordless Brushless 2 Piece Combo Kit Makita

Makita DLX2370T 18V 5.0Ah Li-ion Cordless Brushless 2 Pcs Combo Kit

Makita 18V Li-Ion Cordless Brushless Hammer Driver-Drill – Skin Only

Features:

• Single sleeve keyless chuck
• A wider torque range of 1 – 10Nm in clutch mode allows for versatile applications
• Mode ring selection
• Mechanical 2-speed gearing
• A long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
• All-metal gear construction
• Twin LED job light with after-glow function
• The battery fuel gauge shows power remaining in the battery
• Single sleeve keyless chuck allows for easy bit installation. removal by one hand
• High-performance brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
• Extreme Protection Technology with enhanced dust and drip-resistant performance

Specifications:

• Voltage: 18V
• Impacts Per Minute
• Hi: 0 – 31,000ipm
• Lo: 0 – 8,250ipm
• Max Fastening Torque:
• Hard: 115Nm
• Soft: 60Nm
• Max lock torque: 125Nm
• No Load Speed:
• Hi: 0 – 2,100rpm
• Lo: 0 – 550rpm
• Capacity:
• Masonry: 16mm
• Steel: 13mm
• Wood: 76mm
• Dimensions (L x W x H): 205mm x 79mm x 249mm
• Weight: 2kg

Makita DTW300Z 18V Li-ion Cordless Brushless 1/2″ Impact Wrench – Skin Only

Features:

• 3 forward and 3 reverse Auto-Stop modes for increased efficiency
• 4 Stage power selection for optimum rpm and fastening torque
• 330Nm of Max Torque and 580Nm of Nut-Busting Torque
• XPT technology that protects against dust & moisture
• LED Job light with pre-glow and after-glow functions
• Compact and ergonomic design at only 144mm long

Specifications:

• Voltage: 18V
• Max. capacities standard bolt: M10-M20
• Max. capacities high tensile bolt: M10-M16
• No-load speed: Hard: 0-2,600rpm
• Impact rate: 0-3,200/0-2,600/0-1,800/0-1,000
• Max. fastening torque: 330Nm
• Drive shank: 12.7mm (1/2”) Square
• Length: 144mm
• Weight: 1.8kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no usage.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 66% more run time per charge compared to BL1830
• Fast 45 minute charging time
• The battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• The impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage to dust and moisture
• Star protection computer controls – includes overload protection, over-discharge protection and overheat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp-hour: 5.0Ah
• Cell type: Lithium-Ion
• Charging time: 45 minutes
• Weight: 0.6kg

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

• Built-in CPU – gathers information from the battery’s memory chip to determine the optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V
• Cell capacity: 1.5Ah – 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Warranty:

• 2 Years Warranty Covered By Makita Australia