Makita DLX2411T 18V 5.0Ah Li-Ion Cordless Brushless 2 Piece Combo Kit Makita

Makita DLX2411T 18V 5.0Ah Li-Ion Cordless Brushless 2 Pcs Combo Kit

Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver-Drill

The 18V Brushless Hammer Driver-Drill (DHP486) provides 141Nm of maximum fastening torque and a no-load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length, this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features:

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
• Compact overall length only 178mm for use in narrow workspaces
• High powered brushless motor produces 141Nm peak torque
• High durability aluminium gear housing
• Mechanical 2-speed gearing with all-metal gear construction

Specifications:

• Max Drilling Capacities in Wood:
  • Auger Bit: 50mm
  • Self-feeding Bit: 76mm
  • Hole Saw: 152mm
• Max Drilling Capacities in Steel: 13mm
• Max Drilling Capacities in Masonry: 16mm
• No Load Speed: 
  • Hi: 0 – 2100rpm
  • Lo: 0 – 550rpm
• Impact Rate:
  • Hi: 0 – 31500ipm
  • Lo: 0 – 8250ipm
• Max Peak Torque: 141Nm
• Max Tightening Torque: 
  • Hard: 130Nm
  • Soft: 65Nm
• Overall Length: 178mm
• Voltage: 18V
• Dimensions: 320mm x 130mm x 205mm
• Skin Weight: 2.1kg
• Weight (With Battery): 2.7kg

Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver – Skin Only

The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four-speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts.

Features:

• 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode
• On-the-go single hand impact selection button
• Impressive 180Nm of max. fastening torque
• XPT technology that protects against dust & moisture
• Ultra-compact design with twin dual side LED lights

Specifications:

• Voltage: 18V
• Drive shank: 6.35mm (1/4″) Hex
• Max tightening torque: 180Nm
• No-load speed:
• Max: 0 – 3600rpm
• Hard: 0 – 3200rpm
• Med: 0 – 2100rpm
• Soft: 0 – 1100rpm
• Impact rate:
• Max: 0 – 3800ipm
• Hard: 0 – 3600ipm
• Med: 0 – 2600ipm
• Soft: 0 – 1100ipm
• Max capacity:
• Standard bolt: M5 – M16
• High tensile bolt: M5 – M14
• Length: 116mm
• Weight: 1kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no usage.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 66% more run time per charge compared to BL1830
• Fast 45 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• The impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage to dust and moisture
• Star protection computer controls – includes overload protection, over-discharge protection and overheat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp-hour: 5.0Ah
• Cell type: Lithium-Ion
• Charging time: 45 minutes
• Weight: 0.6kg

Warranty:

• 2 Years Warranty covered by Makita Australia

Makita DC18RC (195589-2) 18V Li-Ion Cordless Battery Fast Charger

Features:

• Built-in CPU – gathers information from the battery’s memory chip to determine the optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V

Makita 18V Brushless Compact Twin Case

Important note: This twin case will only suit DHP480 / DHP481 and the DTD series

Features:

• Heavy Duty polyethylene constructed carrying case
• Can fit 2 x Tool, 2 x Batteries, 1 x Charger

• Cell capacity: 1.5Ah – 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Warranty:

• 2 Years Warranty Covered By Makita Australia