Makita DLX3150TX1 18V 5.0Ah Li-ion Cordless Brushless 3 Piece Combo Kit Makita

Makita DLX3150TX1 18V 5.0Ah Li-ion Cordless Brushless 3 Piece Combo Kit

Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver-Drill

The 18V Brushless Hammer Driver-Drill (DHP486) provides 141Nm of maximum fastening torque and a no-load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length, this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

Features:

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
• Compact overall length only 178mm for use in narrow workspaces
• High powered brushless motor produces 141Nm peak torque
• High durability aluminium gear housing
• Mechanical 2-speed gearing with all-metal gear construction

Specifications:

• Max Drilling Capacities in Wood:
  • Auger Bit: 50mm
  • Self-feeding Bit: 76mm
  • Hole Saw: 152mm
• Max Drilling Capacities in Steel: 13mm
• Max Drilling Capacities in Masonry: 16mm
• No Load Speed: 
  • Hi: 0 – 2100rpm
  • Lo: 0 – 550rpm
• Impact Rate:
  • Hi: 0 – 31500ipm
  • Lo: 0 – 8250ipm
• Max Peak Torque: 141Nm
• Max Tightening Torque: 
  • Hard: 130Nm
  • Soft: 65Nm
• Overall Length: 178mm
• Voltage: 18V
• Dimensions: 320mm x 130mm x 205mm
• Skin Weight: 2.1kg
• Weight (With Battery): 2.7kg

Makita DTW300Z 18V Li-ion Cordless Brushless 1/2″ Impact Wrench – Skin Only

Features:

• 3 forward and 3 reverse Auto-Stop modes for increased efficiency
• 4 Stage power selection for optimum rpm and fastening torque
• 330Nm of Max Torque and 580Nm of Nut-Busting Torque
• XPT technology that protects against dust & moisture
• LED Job light with pre-glow and after-glow functions
• Compact and ergonomic design at only 144mm long

Specifications:

• Voltage: 18V
• Max. capacities standard bolt: M10-M20
• Max. capacities high tensile bolt: M10-M16
• No-load speed: Hard: 0-2,600rpm
• Impact rate: 0-3,200/0-2,600/0-1,800/0-1,000
• Max. fastening torque: 330Nm
• Drive shank: 12.7mm (1/2”) Square
• Length: 144mm
• Weight: 1.8kg

Warranty:

• 3 Years Warranty Covered By Makita Australia

Makita DGA508Z 18V Li-ion Cordless Brushless 125mm (5″) Angle Grinder 

The DGA506 18V Mobile Brushless Angle Grinder features an electric brake and paddle switch. This grinder is ideal for end-users looking for the safety and efficiency of an electric brake previously only seen in Makita’s AC grinders.

Powered by Makita’s 18V Lithium-Ion technology and powerful patented designed BL Brushless Motor, the DGA506Z is designed to suit the needs of tradies looking for a powerful mobile alternative for grinding and cutting anything from steel to concrete. The DGA506Z Angle Grinder also features Automatic Torque Drive, kickback detection, Soft start and anti-restart.

Features:

• Electric brake quickly slows the wheel rotation to a complete stop after the switch has been disengaged
• Soft start allows slower initial disc RPM before reaching full speed, to reduce start-up shock, ensuring user safety
• Automatic torque drive automatically reduces RPM to increase torque when in tougher conditions
• Kickback detection  shuts down the tool to protect the user if the rotation speed suddenly slows down
• Anti-restart function; if the battery is inserted whilst the switch is engaged the tool will not start. The switch must be released and engaged again
• XPT eXtreme Protection Technology enhances dust and drip-resistant performance protecting electrical components
• BL Brushless Motor provides the tool with more power and longer runtimes

Specifications:

• Voltage: 18V
• Wheel size: 125mm
• Bore: 22.23mm
• No-load speed: 8500rpm
• Switch type: Paddle
• Length: 362mm
• Weight: 2.6kg

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no usage.

Features:

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 66% more run time per charge compared to BL1830
• Fast 45 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
• The impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage to dust and moisture
• Star protection computer controls – includes overload protection, over-discharge protection and overheat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

• Voltage: 18V
• Amp-hour: 5.0Ah
• Cell type: Lithium-Ion
• Charging time: 45 minutes
• Weight: 0.6kg

Warranty:

• 2 Years Warranty covered by Makita Australia

Makita DC18RC (195589-2) 18V Li-Ion Cordless Battery Fast Charger

Features:

• Built-in CPU – gathers information from the battery’s memory chip to determine the optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V
• Cell capacity: 1.5Ah – 6.0Ah
• Charge Time: 
• 1.5Ah: 15mins
• 3.0Ah: 22mins
• 4.0Ah: 36mins
• 5.0Ah: 45mins
• 6.0Ah: 55mins
• Length: 185mm
• Weight: 0.82kg

Warranty:

• 2 Years Warranty Covered By Makita Australia

Makita 831278-2 Tool Bag

Features:

• Designed to carry varying loads. The wide deep main pocket provides quick tool recognition and easy access
• External pockets for tools provide quick tool recognition. Wide zipper opening provides easy tool access from the main pocket
• An adjustable heavy-duty shoulder belt makes lifting more comfortable. Metal hooks at the ends let you easily unfasten the belt when not needed
• Handles made of polypropylene tape with small pieces of polyester and foam inside for maximum comfort when carrying  

Specifications:

• Height: 300mm
• Length: 600mm
• Width: 300mm